4. Installing a Switch
4.11 Connecting operation terminals
Connect an operation terminal to the CONSOLE port of the Switch.
To do so, use an RS-232C crossover cable with 9-pin (female) D-sub connectors on
both ends, and use #4-40 screws.
Figure 4-44 Connecting the operation terminal
(1) RS-232C cable
(2) Operation terminal
Step 1
Connect the RS-232C cable to the CONSOLE port of the Switch.
Figure 4-45 Connecting the RS-232C cable
(1) CONSOLE port
(2) RS-232C cable
122