1.4.2 MSU-1B and MSU-1B1
This is a management and switching unit (extended table size type) which is used in
common among the AX6300S series switches.
The MSU-1B and the MSU-1B1 have the following hardware specifications:
Memory card slot: 1 slot
AUX port (RS-232C): 1 port (In the MSU-1B, the AUX port is supported by
software version 10.3 and later.)
CONSOLE port (RS-232C): 1 port
MANAGEMENT port (10BASE-T/100BASE-TX): 1 port
(1) Front view
The front view of the MSU-1B and the MSU-1B1 is shown below.
Figure 1-21 Front view
(1) System operation panel
(2) Memory card slot
(3) AUX port (RS-232C)
(4) CONSOLE port (RS-232C)
(5) MANAGEMENT port (10BASE-T/100BASE-TX)
(6) LEDs
(7) Switches
(2) System operation panel
The figure below shows the external appearance of the system operation panel.
As shown in the figure, the system operation panel has an LCD and three operating
buttons (back, enter, and forward).
The LCD displays information about the Switch.
Pressing the back, enter, or forward button allows you to switch among the menus
that can be displayed on the LCD.
When pressing a switch, do not use anything with a fragile tip, or
anything that might become caught in the Switch, such as a pin or
paper clip. Doing so could result in fire or electric shock.
1. Components Overview
21