Mazda RX-8 Workshop Manual page 1752

4Sleeve
5Piston
(See Piston Disassembly
6Dust seal
7Piston seal
8Caliper body
2. Assemble in the reverse order of disassembly.
Piston Disassembly Note
CAUTION:
The piston could be damaged if blown out with great force. Blow the compressed air slowly
to prevent the piston from suddenly popping out.
1. Insert a piece of wood in the caliper as shown in the figure, and then blow compressed air
through the bleeder screw hole to remove the piston from the caliper body.
< Previous Next >
Note.)
© 2010 Mazda North American Operations, U.S.A.
Back to Top