Jcs2L+; Keep Symbolname; Meminit; O Filename - Analog Devices VisualDSP++ 3.5 Manual

Linker Command-Line Reference

-jcs2l+

Blackfin processors only.
This is a deprecated switch equivalent to the -jcs2l switch.
The switch enables the
-jcs2l+
convert out-of-range branches (
calls/jumps sequences using the
when a call from a function in L2 memory is made to a function in L1
memory.

-keep symbolName

The
-keep sectionName
retain unused symbols. It directs the linker (when
to retain listed symbols in the executable even if they are unused.

-meminit

The
-meminit
post-process the .
ity. This will cause the sections specified in the .
initialized by the C run-time library. By default, if this flag is not speci-
fied, all sections are initialized at "load" time (for example, via the
VisualDSP++ IDDE or the boot loader).

-o filename

The
-o filename
cutable file with the specified name. If
outputs a
.DXE
command in the
OUTPUT()
2-44
-jcs2l
0x800000
P1
(keep unused symbols) switch directs the linker to
(post-processing executable file) switch directs the linker to
file through the MemInit (Memory Initializer) util-
DXE
(output file) switch directs the linker to output the exe-
file in the project's current directory. Alternatively, use the
file to name the output file.
.LDF
VisualDSP++ 3.5 Linker and Utilities Manual
switch and allows the linker to
to
0x7FFFFF
register. This is used, for example,
-e
file to be "run-time"
LDF
is not specified, the linker
filename
) to indirect
or is enabled)
-ev
for 16-Bit Processors