Managing Symbols Properties - Analog Devices VisualDSP++ 3.5 Manual

Managing Symbols Properties

You can view the list of symbols resolved by the linker. You can also add
and remove symbols from the list of symbols kept by the linker. The sym-
bols can be resolved to an absolute address or to a program file (.
assumed that you have enabled the elimination of unused code.
To add or remove a symbol:
1. Right-click in the Input Sections pane of the Expert Linker
window.
2. Choose Properties. The Global Properties dialog box appears.
3. Click the Elimination tab to add or remove a symbol
4. Right-click in the Symbols to keep window.
Choose Add Symbol to open the dialog box and type new symbol
names at the end of the existing list. To delete a symbol, select the
symbol, right-click, and choose Remove Symbol.
To specify symbol resolution:
1. In the Memory Map pane, right-click a processor tab.
2. Choose Properties. The Processor page of the Processor Proper-
ties dialog box appears. The Symbols tab allows you to specify how
symbols are to be resolved by the linker
The symbols can be resolved to an absolute address or to a program file
(. ). When you right-click in the Symbols field, a menu enables you to
DXE
add or remove symbols.
VisualDSP++ 3.5 Linker and Utilities Manual
for 16-Bit Processors
Expert Linker
DXE
(Figure
(Figure 4-46).
). It is
4-45)
4-57