Context Menu - Analog Devices VisualDSP++ 3.5 Manual

Memory Map Pane

Context Menu

Display the context menu by right-clicking in the Memory Map pane.
The menu allows you to select and perform major functions. The available
right-click menu commands are listed below.
View Mode
• Memory Map Tree – Displays the memory map in a tree represen-
tation (see
• Graphical Memory Map – Displays the memory map in graphical
blocks (see
View
• Mapping Strategy (Pre-Link) – Displays the memory map that
shows where you plan to place your object sections
• Link Results (Post-Link) – Displays the memory map that shows
where the object sections were actually placed
New
• Memory Segment – Allows you to specify the name, address range,
type, size, and so on for memory segments you want to add.
• Output Section – Adds an output section to the selected memory
segment. (Right-click on the memory segment to access this com-
mand.) If you do not right-click on a memory segment, this option
is disabled.
The options are: Name, Overflow (name of output section to catch
overflow), Packing, and Number of bytes (number of bytes to be
reordered at one time.
• Shared Memory – Adds a shared memory to the memory map.
4-20
Figure 4-16 on page
Figure 4-17 on page
VisualDSP++ 3.5 Linker and Utilities Manual
4-22)
4-24)
for 16-Bit Processors