Analog Devices VisualDSP++ 3.5 Manual page 180

Memory Map Pane
To add a shared memory section to the .
ory Map pane and select New/Shared Memory. Then specify a name for
the shared memory segment (.
to this shared memory segment.
As shown in Figure
cessors and
P0
variables declared in the shared memory segment will be accessed by both
processors in the system. In order for the linker to be able to correctly
resolve these variables, the link against command should be used once
again.
Figure 4-39. Shared Memory Segment
4-46
) and select the processors that have access
SM
4-39, a new shared memory segment, visible to pro-
, has been successfully added to the system. Note that
P1
VisualDSP++ 3.5 Linker and Utilities Manual
file, right-click in the Mem-
LDF
for 16-Bit Processors