Managing Output Section Properties - Analog Devices VisualDSP++ 3.5 Manual

Managing Object Properties

Managing Output Section Properties

The Output Section tab allows you to change the output section's name
or to set the overflow. Overflow allows objects that do not fit in the cur-
rent output section to spill over into the specified output section. By
default, all objects that do not fit (except objects that are manually pinned
to the current output section) overflow to the specified section.
To specify output section properties:
1. Right-click an output section (for example,
CODE_DXE
2. Choose Properties
Figure 4-49. Output Section Properties Dialog Box – Output Section Tab
4-62
) in the Memory Map pane.
(Figure
VisualDSP++ 3.5 Linker and Utilities Manual
PROGRAM_DXE
4-49)
or
for 16-Bit Processors