Es Sectionname; Flags-Meminit -Opt1 - Analog Devices VisualDSP++ 3.5 Manual

-e
The (eliminate unused symbols) switch directs the linker to eliminate
-e
unused symbols from the executable.
In order for the C and C++ run-time libraries to work properly, the
following symbols should be retained with
on page
___ctor_NULL_marker

-es sectionName

The
-es sectionName
which the elimination algorithm is to be applied. This switch restricts
elimination to the named input sections. The
command line more than once. Both this switch and the
ELIMINATE_SECTIONS()
specify sections from which unreferenced code and data are to be
eliminated.
In order for the C and C++ run-time libraries to work properly, the
following symbols should be retained with
on page
___ctor_NULL_marker
-ev
The switch directs the linker to eliminate unused symbols and ver-
-ev
bose, and provides reports on each eliminated symbol.
-flags-meminit -opt1[,-opt2...
The
-flags-meminit
MemInit (Memory Initializer) utility.
VisualDSP++ 3.5 Linker and Utilities Manual
for 16-Bit Processors
3-27):
and
(eliminate listed section) switch specifies a section to
LDF command (see
3-27):
and
switch passes each comma-separated option to the
"KEEP()"
___lib_end_of_heap_descriptions
switch may be used on a
-es
on page
"KEEP()"
___lib_end_of_heap_descriptions
Linker
(described
3-26) may be used to
(described
2-41