Linker Command-Line Files (.Txt - Analog Devices VisualDSP++ 3.5 Manual

Linker Command-Line Files (.TXT)

Linker command-line files (
command-line input for the linker. For more information on the linker
command line, see
Build Files
Build files are produced by the VisualDSP++ development tools when you
build a project. This section describes these build file formats:
• "Assembler Object Files (.DOJ)" on page A-5
• "Library Files (.DLB)" on page A-6
• "Linker Output Files (.DXE, .SM, and .OVL)" on page A-6
• "Memory Map Files (.XML)" on page A-6
• "Loader Output Files in Intel Hex-32 Format (.LDR)" on
page A-6
• "Splitter Output Files in ASCII Format (.LDR)" on page A-8
Assembler Object Files (.DOJ)
Assembler output object files (
file (ELF) format. Object files contain relocatable code and debugging
information for a DSP program's memory segments. The linker processes
object files into an executable file (
file's ELF format, see the
VisualDSP++ 3.5 Linker and Utilities Manual
for 16-Bit Processors
) are ASCII text files that contain
.TXT
"Linker Command-Line Reference" on page
) are in binary, executable and linkable
.DOJ
.DXE
"Format References" on page
). For information on the object
A-10.
File Formats
2-30.
A-5