Linker And Assembler Preprocessor - Analog Devices VisualDSP++ 3.5 Manual

Linker and Assembler Preprocessor

The linker and assembler preprocessor program (
processes preprocessor commands in source files. With these commands,
you direct the preprocessor to define macros and symbolic constants,
include header files, test for errors, and control conditional assembly and
compilation.
The preprocessor is run by the assembler or linker from the operating
pp
system's command line or within the VisualDSP++ environment. These
tools accept and pass this command information to the preprocessor. The
preprocessor can also operate from the command line using its own com-
mand-line switches.
The preprocessor supports ANSI C standard preprocessing with
extensions but differs from the ANSI C standard preprocessor in
several ways. For more information on rhe
VisualDSP++ 3.5 Assembler & Preprocessor Manual for appropriate
target archtecture.
The compiler has it own preprocessor that allows you to use pre-
processor commands within your C/C++ source. The compiler
preprocessor automatically runs before the compiler. For more
information, see the VisualDSP++ 3.5 C/C++ Compiler and Library
Manual for the target processors.
VisualDSP++ 3.5 Linker and Utilities Manual
for 16-Bit Processors
Introduction
) evaluates and
pp.exe
preprocessor, see the
pp
1-7