Profiling Object Sections - Analog Devices VisualDSP++ 3.5 Manual

Memory Map Pane

Profiling Object Sections

You can use Expert Linker to profile object sections in your program.
After doing so, Expert Linker graphically displays how much time was
spent in each object section so you can locate code "hotspots" and move
the code to faster, internal memory.
The following is a sample profiling procedure. Start it by selecting Profile
execution of object sections in the General page of the Global Properties
dialog box (Figure
Figure 4-32. General Page of the Global Properties Dialog Box
Then build the project and load the program. After the program is loaded,
Expert Linker sets up the profiling bins to collect the profiling
information.
4-40
4-32)
VisualDSP++ 3.5 Linker and Utilities Manual
for 16-Bit Processors