Analog Devices VisualDSP++ 3.5 Manual page 43

Figure 2-2. VisualDSP++ Environment
Within VisualDSP++, specify tool settings for project builds. Modify
linker options via the Link tab of the Project Options dialog box
(Figure 2-3). Choosing a Category from the pull-down list at the top of
the Link tab presents different panes of options.
There are four sub-pages you can access—General, LDF Preprocessing,
Elimination, and Processor. Almost every setting option has a corre-
sponding compiler command-line switch described in
Command-Line Switches" on page
VisualDSP++ 3.5 Linker and Utilities Manual
for 16-Bit Processors
2-34. The Additional options field in
Linker
"Linker
2-7