Header Files (.H; Linker Description Files (.Ldf - Analog Devices VisualDSP++ 3.5 Manual

Source Files
in a 16-bit wide buffer, the assembler loads the equivalent 8-bit value into
the most significant 8 bits in the 8-bit memory location and zero-fills the
lower eight bits.
Table A-1. Numeric Formats
Convention
0xnumber
H#number
h#number
number
D#number
#
d number
B#number
b#number
O#number
o#number

Header Files (.H)

Header files are ASCII text files that contain macros or other preprocessor
commands that the preprocessor substitutes into source files. For informa-
tion on macros or other preprocessor commands, see the For information
on the assembler and preprocessor, see the VisualDSP++ 3.5 Assembler and
Preprocessor Manual for appropriate target architectures.

Linker Description Files (.LDF)

Linker Description Files (.
mands for the linker in the linker's scripting language. For information on
this scripting language, see
A-4
Description
Hexadecimal number.
Decimal number.
Binary number.
Octal number.
) are ASCII text files that contain com-
LDF
"LDF Commands" on page
VisualDSP++ 3.5 Linker and Utilities Manual
3-23.
for 16-Bit Processors