Step 2: Specifying System Information - Analog Devices VisualDSP++ 3.5 Manual

Launching the Create LDF Wizard
Note that in case a mix of assembly and C files, or any other combination
is used, the most abstract programming language should be selected. For
example, for a project with C and assembly files, a C LDF should be
selected. Similarly, for a C++ and C project the C++ LDF should be
selected.
Press Next.

Step 2: Specifying System Information

You must now choose whether the project is for a single-processor system
or a multiprocessor (MP) system.
Figure 4-4. Selecting System and Processor Types
4-6 VisualDSP++ 3.5 Linker and Utilities Manual
for 16-Bit Processors