Mpmemory - Analog Devices VisualDSP++ 3.5 Manual

Advanced LDF Commands

MPMEMORY{}

L
The
MPMEMORY{}
physical shared memory, such as Blackfin processors and
ADSP-2192-12 DSPs.
The
MPMEMORY{}
memory in a multiprocessor target system. After you declare the processor
names and memory segment offsets with the
linker uses the offsets during multiprocessor linking. Refer to
Overlay Support" on page 5-8
functionality.
Your file (and other
.LDF
command only. The maximum number of processors that you
MPMEMORY{}
can declare is architecture-specific. Follow the
processor_name
PROCESSOR
and
MEMORY{} SECTIONS{}
Figure 5-6 shows
MPMEMORY{
Figure 5-6. MPMEMORY{} Command Syntax Tree
5-28
command is used with DSPs that implement
command specifies the offset of each processor's physical
for a detailed description of overlay
files that it includes), may contain one
.LDF
commands, which contain each processor's
{}
commands.
command syntax.
MPMEMORY{}
shared_segment_commands
{
processor_name
START(
}
VisualDSP++ 3.5 Linker and Utilities Manual
MPMEMORY{}
MPMEMORY{}
}
)
address_number
for 16-Bit Processors
command, the
"Memory
command with