Analog Devices VisualDSP++ 3.5 Manual page 110

LDF Commands
• "PROCESSOR{}" on page 3-39
• "RESOLVE()" on page 3-40
• "SEARCH_DIR()" on page 3-41
• "SECTIONS{}" on page 3-42
• "SHARED_MEMORY{}" on page 3-48
ALIGN()
The
ALIGN(number)
counter to the next address that is a multiple of
power of 2.
is a word boundary (address) that depends on the word size of the
number
memory segment in which the
ARCHITECTURE()
The
ARCHITECTURE()
An file may contain one
.LDF
The
ARCHITECTURE
applying to the entire
The command's syntax is:
ARCHITECTURE(processor)
The
ARCHITECTURE()
may be
ADSP-BF535
valid, but
adsp-BF535
3-24
command aligns the address of the current location
ALIGN()
command specifies the target system's processor.
ARCHITECTURE()
command must appear with global LDF scope,
file.
.LDF
command is case sensitive. For example, valid entries
, ,
ADSP-2189 ADSP-21990
is not valid.
VisualDSP++ 3.5 Linker and Utilities Manual
, where
number
takes place.
command only.
, etc. Thus,
ADSP-BF535
for 16-Bit Processors
is a
number
is