Analog Devices VisualDSP++ 3.5 Manual page 279

C LDF PROGRAMMING
EXAMPLES FOR BLACKFIN
PROCESSORS
This appendix provides several typical LDFs. used with Blackfin proces-
sors. As you modify these examples, refer to the syntax descriptions in
"LDF Commands" on page
This appendix provides the following examples.
• "Linking for a Single-Processor System" on page C-2
• "Linking Large Uninitialized or Zero-initialized Variables" on
page C-4
• "Linking for Assembly Source File" on page C-6
• "Linking for C Source File – Example 1" on page C-8
• "Linking for Complex C Source File – Example 2" on page C-11
• "Linking for Overlay Memory" on page C-17
The source code for several programs is bundled with the
development software. Each program includes an
working examples of the linking process, examine the
that come with the examples. These examples are in the directory:
VisualDSP++ InstallPath>\Blackfin\examples
The development software includes a variety of preprocessor
default
processor's internal memory architecture. The default
in the directory:
VisualDSP++ InstallPath>\Blackfin\ldf
VisualDSP++ 3.5 Linker and Utilities Manual
for 16-Bit Processors
3-23.
files. These files provide an example
.LDF
file. For
.LDF
files
.LDF
for each
.LDF
files are
.LDF
C-1