Memory Map Pane - Analog Devices VisualDSP++ 3.5 Manual

Memory Map Pane

Memory Map Pane
In an . file, the linker's
LDF
physical memory. Its argument list partitions memory into memory seg-
ments and specify start and end addresses, memory width, and memory
type (such as program, data, stack, and so on). It connects your program
to the target system. The
an executable (.
typical memory map pane; ADSP-218x DSP is used this example.
Figure 4-14. Expert Linker Window – Memory Map
The combo box (located to the right of the Memory Map label) applies
only to ADSP-218x DSPs.
4-18
MEMORY()
OUTPUT()
) file and specifies its file name.
DXE
VisualDSP++ 3.5 Linker and Utilities Manual
command defines the target system's
command directs the linker to produce
Figure 4-14 shows a
for 16-Bit Processors