Passing Arguments For Simulation Or Emulation: Blackfin Processors Only - Analog Devices VisualDSP++ 3.5 Manual

Passing Arguments for Simulation or
Emulation: Blackfin Processors ONLY
To support simulation and emulation in Blackfin processors, the linker
should obtain the start address and buffer length of the argument list from
the memory segment of the .
ARGV
.LDF File for Blackfin Processors" on page
To set the address:
1. In the
MEMORY{}
2. Add a command to define the
ldf_argv_space
Refer to the VisualDSP++ 3.5 User's Manual for 16-Bit Processors or online
Help for information about the simulator and command-line arguments.
Do not use command-line arguments for linked programs without
first modifying the .
application.
VisualDSP++ 3.5 Linker and Utilities Manual
for 16-Bit Processors
file (refer to
LDF
section, add a line to define the
ARGV
,
ldf_argv_length
file to allocate a buffer suitable for your
LDF
"Example 1 – Basic
3-4).
MEM_ARGV
section and the values for
, and
ldf_argv_end.
Linker
section.
2-29