Launching The Create Ldf Wizard - Analog Devices VisualDSP++ 3.5 Manual

Launching the Create LDF Wizard

Launching the Create LDF Wizard
From the VisualDSP++ main menu, choose Tools -> Expert Linker ->
Create LDF to invoke a wizard that allows you to create and customize a
new . file. You use the Create LDF option when you create a new
LDF
project.
Figure 4-2. Welcome Page of the Create LDF Wizard
If an . file is already in the project, you are prompted to confirm
LDF
whether to create a new .
command is disabled when VisualDSP++ does not have a project opened
or when the project's processor-build target is not supported by Expert
Linker. Press Next to run the wizard.
4-4
file to replace the existing one. This menu
LDF
VisualDSP++ 3.5 Linker and Utilities Manual
for 16-Bit Processors