Locking/Unlocking The Carriage And Opening/Closing The Cdr Tray Base - Epson Stylus Photo R2000s Series Service Manual

EPSON Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series
4.1.5.1 Protection for Transportation (Securing the Carriage)
(T.B.D)
Before packing the printer to be returned to the user, attach several pieces of strong
tape to the carriage to prevent damage during transportation.
1. Attach one side of the 40mm-length portion of the tape without folded end to the
left side of the carriage aligning the tape's corner with the carriage's ribs as shown
below.
2. Move the carriage to the right until it hits the Carriage Lock and hold it as it is,
then attach the folded side of the tape to the housing.
Figure 4-3. Securing the Carriage
Disassembly And Assembly
T.B.D
4.1.6 Locking/Unlocking the Carriage and Opening/
Closing the CDR Tray Base
Locking/releasing the Carriage and opening/closing the CDR Tray Base are mutually
related. The CDR Tray Base cannot be opened when the Carriage Lock is released.
Lock the Carriage in the following procedure, when opening the CDR Tray Base.
1. Remove the Decoration Plate Right.
(p.82))
2. Insert a phillips screwdriver into the hole on the right side of the frame, and rotate
the white shaft of the Ink System Unit.
Table 4-4. Relationship between Carriage Lock/Release and CDR Tray Base
Direction of
Rotation
Clockwise (CW)
Counterclockwise
(CCW)
Figure 4-4. Unlock the Carriage
C H E C K
The CDR Tray Base and the Front Cover are opened/closed
P O I N T
together.
Overview
(Refer to 4.2.6 Decoration Plate Left/Right
Carriage CDR Tray Base
Can be
Locked
opened/closed.
Unlocked Locked
CCW
CW
White Shaft
Revision I
75