Show Ip Ospf Neighbor - Zte ZXR10 8900 Series Command Reference Manual

Purpose
Command Modes
Syntax
Syntax
Description
The displayed information is described below.
Field
OSPF Router with id
Process ID
Area 0.0.0.0 has 2 MPLS
TE links.
Fragment
MPLS TE router ID
Link connected to
Link ID
Interface Address
Neighbor Interface
Address
Admin Metric
igp
Maximum bandwidth
Maximum reservable
bandwidth
Number of Priority
Priority 0 (or any number
from 0 to 8)

show ip ospf neighbor

Use this command to show the information of OSPF neighbors.
And this command supports the list show and detailed show.
All modes
show ip ospf neighbor [detail][interface <interface-name>][n
eighbor-id <neighbor>][process <process-id>]
detail
interface <interface-
name>
Confidential and Proprietary Information of ZTE CORPORATION
Description
Router ID
OSPF process number
Number of MPLS TE links included in the
area
Serial number lf a link
Router id of ospf traffic engineering
Type of TLV links, point-to-point or
broadcast
Identifier of a TLV link
Its own address in the link the TLV link
describes
Address of neighbors in the link the TLV
link describes
Distance of traffic engineering
Distance of internal gateway protocol
Maximum physical bandwidth, unit: bps
Maximum reservable bandwidth, unit:
bps
Number of priority queues, unit: bps
Reservable bandwidth of the use of this
priority, unit: bps
Shows the detailed information
Interface Name
Chapter 3 OSPF Protocol
89