Ip Ospf Authentication; Ip Ospf Authentication-Key - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (IP Routing Volume I)
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Purpose
Command Modes
Syntax
54 Confidential and Proprietary Information of ZTE CORPORATION
This example sets the longest time of nsf to 300 seconds.
ZXR10(config)#router ospf 1
ZXR10(config-router)#grace-period 300
capability opaque
nsf

ip ospf authentication

Use this command to configure authentication mode for the inter-
face. Delete the configured interface authentication mode with the
no form of this command.
Interface configuration
ip ospf authentication [null | message-digest]
no ip ospf authentication
message-digest
null
No authentication mode is specified on the interface. If there is
authentication in the area some interface lies in, the interface will
inherit the authentication mode of the area.
� This command is supported after the platform version 4.6.02.
� If there is no parameter, the authentication mode of an inter-
face this command configure will be simple password authen-
tication mode (type 1 authentication).
� If both the area some interface lies in and the interface are
configured with authentication, the authentication pivots that
of the interface.
This example sets message-digest as the authentication mode of
the interface.
XR10(config)#interface fei_5/1
ZXR10(config-if)#ip ospf authentication message-digest

ip ospf authentication-key

Use this command to set a password for the interface with simple
password authentication. Delete the configured OSPF password
with the no command.
Interface configuration
ip ospf authentication-key <password>
no ip ospf authentication-key
Type 2 authentication, namely, the message
digest authentication
Type 0 authentication, namely, no
authentication