Zte ZXR10 8900 Series Command Reference Manual page 10

ZXR10 8900 Series Command Reference (IP Routing Volume I)
Overview
ii Confidential and Proprietary Information of ZTE CORPORATION
Manual Name
ZXR10 8900 Series (V2.8.02.C)
10G Routing Switch Command
Reference (Basic Configuration
Volume II)
ZXR10 8900 Series (V2.8.02.C)
10G Routing Switch Command
Reference (Basic Configuration
Volume III)
ZXR10 8900 Series (V2.8.02.C)
10G Routing Switch Command
Reference (Network Management)
ZXR10 8900 Series (V2.8.02.C)
10G Routing Switch Command
Reference (Ethernet Switch)
ZXR10 8900 Series (V2.8.02.C)
10G Routing Switch Command
Reference (Voice and Video)
ZXR10 8900 Series (V2.8.02.C)
10G Routing Switch Command
Reference (Multicast)
The content of this manual is based on uniform ZXROS platform.
Unless otherwise specified or when it is specified to ZXR10, the
manual applies to all devices. The items about router in the man-
ual also apply to switch with routing function.
This manual describes IPv4-related commands (RIP, OSPF and
IS-IS routing protocols) in ZXR10 8900 series (V2.8.02.C) 10G
routing switch and contains the following chapters:
Chapter
Chapter 1 DPI
Overview
Chapter 2 RIPng
Protocol
Chapter 3 OSPF
Protocol
Chapter 4 IS-IS
Protocol
Summary
This manual describes interface
configuration, DHCP and
VRRP-related commands in
ZXR10 8900 series 10G routing
switch.
This manual describes NAT, Time
Range, stack and DEBUG-related
commands in ZXR10 8900 series
10G routing switch.
This manual describes network
management-related commands
in ZXR10 8900 series 10G routing
switch.
This manual describes MAC,
VLAN, SuperVLAN, STP, link
aggregation, VBAS, MAC PING
and UDLD-related commands in
ZXR10 8900 series 10G routing
switch.
This manual describes VOIP and
IPTV-related commands in ZXR10
8900 series 10G routing switch.
This manual describes multicast
protocol-related commands in
ZXR10 8900 series 10G routing
switch.
Overview
This chapter describes using method of this
command manual, command description,
command formats, auxiliary functions and
command modes.
This chapter describes the configuration and show
commands of RIPng.
This chapter describes the configuration and show
commands of OSPF.
This chapter describes the configuration and show
commands of IS-IS.