Distribute-List - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (IP Routing Volume I)
Example
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
48 Confidential and Proprietary Information of ZTE CORPORATION
� When the route priority is 255, this command does not take
effect.
This example sets internal the dominion distance as 100.
ZXR10(config)#router ospf 1
ZXR10(config-router)#distance ospf internal 100

distribute-list

The in command of the distribute-list command is used to filter
the route of OSPF.
The out command of the distribute-list command is used to con-
trol over outside route's leading into OSPF area after type 5 and
type 7 LSA are generated. It is a complement of the command
redistribute.
Router configuration
distribute-list {<access-list-num>{in | out}| access-list <acc
ess-list-name>{in | out}| prefix <name of an IP prefix-list>{g
ateway <name of an IP prefix-list> in | out}| gateway <name
of an IP prefix-list> in | route-map <name of a route-map> in}
no distribute-list {<access-list-num>{in | out}| access-list
<access-list-name>{in
prefix-list>{gateway <name of an IP prefix-list> in | out}|
gateway <name of an IP prefix-list> in | route-map <name of
a route-map> in}
<access-list-num>
<access-list-name>
<name of an IP
prefix-list>
<name of a
route-map>
in | out
If this command is not used, that is to say, no route filtering and
externalLSA leading control.
� gate-way and route-map is only used in in command
� acl, gate-way, route-map are permit when template does
not exist, otherwise deny.
� The template denies all by default. If some routes are required
to deny, then the parameter permit all should be added to per-
mit other routes.
| out}| prefix
Numeric ACL the range is <1~199>and
extended range is <1000~1999>
Name ACL the first character shouldn't be
number and must be the current acl
Name of the template borrow from prefix-list
Name of the template borrow from route-map
in represents that the specific template is
used to route filtering; out represents that
the specific template is used to supply for
redistribution
<name of an IP