ZXR10 8900 Series Command Reference (IP Routing Volume I)
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Defaults
Example
Purpose
Command Modes
Syntax
Example
104
Confidential and Proprietary Information of ZTE CORPORATION
dynamic
This command is supported after the platform version 4.8.02.
This example sets the system hostname is obtained dynamically.
ZXR10(config)#router isis
ZXR10(config-router)#hostname dynamic
hostname dynamic
no hostname dynamic
ignore-lsp-errors
To allow the router to ignore IS-IS link-state packets received with
internal checksum errors by way of directly dropping link-state
packets, use the ignore-lsp-errors command. To disable the
function, use the no form of this command.
Router configuration
ignore-lsp-errors
no ignore-lsp-errors
Link-state packets received with checksum errors are purged in-
stead of directly dropped.
This example directly drops IS-IS link-state packets received with
checksum errors, and then restores default with the no form of
this command.
ZXR10(config)#router isis
ZXR10(config-router)#ignore-lsp-errors
ZXR10(config-router)#no ignore-lsp-errors
ip router isis
Use this command to add this interface into the IS-IS instance.
Delete the interface from the IS-IS instance with the no form of
this command.
Interface configuration
ip router isis
no ip router isis
This example adds the interface fei_1/1 into the IS-IS instance.
ZXR10(config)#interface fei_1/1
ZXR10(config-intf)#ip router isis
The hostname of system is obtained
dynamically