Show Ip Ospf Request-List - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (IP Routing Volume I)
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
92 Confidential and Proprietary Information of ZTE CORPORATION
OSPF Router with ID (134.1.1.201) (Process ID 200)
This router is a helper of graceful restart
Restarting router ID 134.1.1.200
In the area 0.0.0.0
via interface gei_7/1 134.1.1.200
Neighbor is BDR
State EXCH
Max grace period 240
Start time 00:23:42
Time to leave 219 s
The displayed information is described below.
Field
Restarting router ID
In the area
via interface gei_7/1
Neighbor is BDR
State
Start time
Max grace period
Time to leave

show ip ospf request-list

Use this command to show the list of all the link status advertise-
ments the router requests.
All modes
show ip ospf request-list [<neighbor>|<interface-name><inte
rface-neighbor>][process <process-id>]
<neighbor>
<interface-name>
<interface-neighbor>
process <process-
id>
This command is supported after the platform version 4.6.02.
This example shows advertisements of the link status the LSR
packet waits to request on the interface fei_1/1.
Description
Router ID of the restarter
Area of links of nsf
Type, serial number and IP addresses of
the interface of the restarter
The restarter is BDR
Status of the restarter
Time the router enter the help mode
Maximum period of non-stop forwarding
Time left the router leaves the help mode
Shows all advertisements of link status LSR
packets waits to request from this neighbor
Shows all advertisements of link status LSR
packets waits to request on this interface
Shows all advertisements of link status
LSR packets waits to request from the this
neighbor on this interface
OSPF process ID, range: 1~65535