Zte ZXR10 8900 Series Command Reference Manual page 100

ZXR10 8900 Series Command Reference (IP Routing Volume I)
Instructions
Example
90 Confidential and Proprietary Information of ZTE CORPORATION
neighbor-id
<neighbor>
process <process-
id>
This command is supported after the platform version 4.6.02.
This example shows the information of OSPF neighbors.
ZXR10#show ip ospf neighbor
OSPF Router with ID (25.25.25.25) (Process ID 1)
Neighbor ID Pri State
35.35.35.35 1 FULL/BDR
15.15.15.15 1 FULL/BDR
ZXR10#
ZXR10#show ip ospf neighbor detail
OSPF Router with ID (10.10.10.10) (Process ID 200)
Neighbor 134.1.1.201
In the area 0.0.0.0
via interface gei_7/1 134.1.1.201
Neighbor is DROTHER
State FULL, priority 0, Cost 1
Queue count : Retransmit 0, DD 0, LS Req 0
Dead time : 00:00:38 Options : 0x42
In Full State for 00:03:52
The displayed information is described below.
Field
Neighbor
In the area
via interface fei_1/1
DR
BDR
State
Priority
Cost
Queue count
Retransmit
DD
LS Req
Dead Time
Options
In Full State
Neighbor ID, in the form of dotted decimal
OSPF process ID, range: 1~65535
DeadTime Address
00:00:28 20.0.0.35
00:00:33 10.0.0.15
Description
Neighbor ID
Area of the neighbor
Type, serial number and IP address of the
interface of the neighbor
Router ID of the DR
Router ID of the BDR
Neighbor status
Neighbor priority
Neighbor cost
Length of a variety of queues of the
neighbor listed after it respectively
Length of the retransmit queue
Length of the DD queue
Length of the request queue
Minimum time during which the neighbor
enter the status of "down"
Neighbor options
Time since the full state
Interface
fei_1/2
fei_1/1