Zte ZXR10 8900 Series Command Reference Manual page 141

Syntax
Description
<system-id>
range <range-numb
er>
� IS-IS protocol will not start until the system identifier is spec-
Instructions
ified.
� To change the system identifier, use the no form of this com-
mand first to delete the old one.
This example describes how to set the system identifier of IS-IS.
Example
ZXR10(config)#router isis
ZXR10(config-router)#system-id 1111.1111.1111
ZXR10(config-router)#system-id 1111.1111.1111 range 32
System identifier of the instance in 6-byte
hex strings, in the xxxx.xxxx.xxxx format
Expandable range of the system identifier,
range: 0~32, default: 0. The instance
will use the ID value from <system-id> to
<system-id> + <range-number>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 IS-IS Protocol
131