Ip Ospf Retransmit-Interval; Ip Ospf Transmit-Delay - Zte ZXR10 8900 Series Command Reference Manual

Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
nsf

ip ospf retransmit-interval

Use this command to specify the time interval for some interface to
retransmit LSA. Restore default with the no form of this command.
Interface configuration
ip ospf retransmit-interval <seconds>
no ip ospf retransmit-interval
<seconds>
This command is supported after the platform version 4.6.02.
This example sets the time interval for the interface to retransmit
LSA as 10 seconds.
ZXR10(config)#interface fei_5/1
ZXR10(config-if)#ip ospf retransmit-interval 10

ip ospf transmit-delay

Use this command to specify the delay for some interface to trans-
mit a link status update packet. Restore default with the no form
of this command.
Interface configuration
ip ospf transmit-delay <seconds>
no ip ospf transmit-delay
<seconds>
This command is supported after the platform version 4.6.02.
This example sets the delay for some interface to transmit a link
status update packet as 2 seconds.
ZXR10(config)#interface fei_5/1
ZXR10(config-if)#ip ospf retransmit-delay 2
Confidential and Proprietary Information of ZTE CORPORATION
Time interval for some interface to retransmit
LSA, unit: second, range: 1~65535, default:
5 seconds
Delay for some interface to transmit a link
status update packet, unit: second, range:
1~65535, default: 1 second
Chapter 3 OSPF Protocol
61