Show Ip Ospf Interface - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (IP Routing Volume I)
Purpose
Command Mode
Syntax
Syntax
Description
Instructions
Example
86 Confidential and Proprietary Information of ZTE CORPORATION
Field
Router
Network
Summary Net
Summary ASBR
Type-7 Ext
Opaque Link
Opaque Area
Subtotal
Type-5 Ext
Opaque AS
Total

show ip ospf interface

Use this command to show information of the OSPF interface.
All modes
show ip ospf interface [<interface-name>][process <process-
id>]
<interface-name>
process <process-
id>
This command is supported after the platform version 4.6.02.
This example shows the information of OSPF interface fei_2/1.
ZXR10#show ip ospf interface fei_2/1 process 1
OSPF Router with ID (1.2.3.4) (Process ID 1)
fei_2/1 is up
Internet Address 110.1.1.100 255.255.255.0 enable
Up for 00:01:07
In the area 0.0.0.1 BDR
Cost 1, Priority 1, Network Type broadcast
Description
Advertisements of router link
status
Advertisement of network link
status
Advertisements of summary link
status of network
Advertisements of summary link
status of ASBR
Advertisements of external link
status of type 7
Advertisements of local opaque link
status in the process of nsf
Advertisements of opaque link
status of the area supporting TE
Total number of LSAs in the area
Advertisement of external link
status of type 5
Always 0
Total number of LSAs
Interface Name
OSPF process ID, range: 1~65535