Zte ZXR10 8900 Series Command Reference Manual page 39

Syntax
Description
1
2
The version is 2.
Defaults
Use the ip rip receive version and ip rip send version com-
Instructions
mands to specially specify the version of RIP on the interface.
This example sets the version of RIP as 2.
Example
ZXR10(config-router)#version 2
ip rip receive version
Related
Commands
ip rip send version
Specify RIPv1 as the version received and
sent
Specify RIPv2 as the version received and
sent
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 RIP Protocol
29