Zte ZXR10 8900 Series Command Reference Manual page 90

ZXR10 8900 Series Command Reference (IP Routing Volume I)
80 Confidential and Proprietary Information of ZTE CORPORATION
Field
Metric
Forward Address
External Route Tag
� This example uses the show ip ospf database network com-
mand.
ZXR10#show ip ospf database network
OSPF Router with ID (110.1.1.1) (Process ID 1)
Net Link States (Area 0.0.0.1)
Routing Bit Set on this LSA
LS age: 789
Options: (No TOS-capability, No DC)
LS Type: Network Links
Link State ID: 168.1.1.1 (Address of Designated Router)
Advertising Router: 110.1.1.1
LS Seq Number: 0x80000002
Checksum: 0x9787
Length: 32
Network Mask: /16
Attached Router: 110.1.1.1
Attached Router: 168.1.1.3
The displayed information is described below.
OSPF Router with id
Process ID
LS age
Options
Seq#
LS Type
Link State ID
Advertising Router
LS Seq Number
Checksum
Length
Network Mask
Attached Router
� This example uses the show ip ospf database router.
ZXR10#show ip ospf database router
OSPF Router with ID (110.1.1.1) (Process ID 1)
Router Link States (Area 0.0.0.1)
Description
Cost of link status
Forwarding address. If it is 0.0.0.0, the
advertisement router will be used for the
forwarding.
32-bit appended value of external routes,
ospf protocol does not use it
Router ID
OSPF process number
Link status age
Option of service type (always 0)
Link status serial number
Link status type
Link status identifier
Advertisement router ID
Link status serial number
Checksum of advertisements of the whole
link status
Length of the link status advertisement
Network mask
Address list of OSPF routers connected
with the network