Mpls Traffic-Eng - Zte ZXR10 8900 Series Command Reference Manual

Syntax
Description
Defaults
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
narrow
wide
If level-1 or level-2 is not specified, this command acts at both
level-1 and level-2 at the same time.
The default metric style is narrow.
If this command acts at both level-1 and level-2 at the same time
and the metric style changes, the redistribution policy, SUMMARY
policy and the default metric route of the interface will be deleted.
This example sets the IS-IS metric style.
ZXR10(config)#router isis
ZXR10(config-router)#metric-style narrow
ZXR10(config-router)#metric-style wide

mpls traffic-eng

Use this command to set the IS-IS parameters related with the
MPLS traffic engineering.
Router configuration
mpls traffic-eng {level-1 | level-2 |{router-id <Int No.>}}
no mpls traffic-eng {level-1 | level-2 |{router-id <Int No.>}}
no metric-style
level-1
level-2
router-id
<interface-name>
The configuration of IS-IS traffic engineering needs to first config-
ure the metric-style as wide.
This example configures IS-IS level-1 starting traffic engineering
and sets the router-id.
ZXR10(config)#router isis
ZXR10(config-router)#mpls traffic-eng level-1
ZXR10(config-router)#mpls traffic-eng router-id loopback1
Confidential and Proprietary Information of ZTE CORPORATION
Metric style is narrow
Metric style is wide
The router is in area level-1
The router is in area level-2
Router-id designated by IS-IS traffic
engineering
Interface name
Chapter 4 IS-IS Protocol
117