Enable-Snp-Authentication; Fast-Reroute - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (IP Routing Volume I)
Command Modes
Syntax
Instructions
Example
Related
Commands
History Command
Purpose
Command Modes
Syntax
Defaults
Instructions
Example
Related
Commands
History Command
Purpose
Command Modes
Syntax
102 Confidential and Proprietary Information of ZTE CORPORATION
Router configuration
enable
� This command is supported after the platform version 4.6.02.
�
After IS-IS instances are disabled by the disable command,
this command can be used to make IS-IS instances go on
runnning.
This example makes IS-IS instances go on running.
ZXR10(config)#router isis
ZXR10(config-router)#enable
disable
Before the platform version 4.6.02, the command no disable is
adopted.

enable-snp-authentication

Use this command to enable the authentication of SNP packets.
The disable-snp-authentication command is used to disable it.
Router configuration

enable-snp-authentication

After the authentication of LSP packets is enabled, the authenti-
cation of SNP packets is automatically enabled.
� This command is supported after the platform version 4.6.02.
� The disable-snp-authentication command is used to clear
the authentication of SNP packets
This example enables the authentication of SNP packets.
ZXR10(config)#router isis
ZXR10(config-router)#enable-snp-authentication
disable-snp-authentication
Before the platform version 4.6.02 the command set-snp-authe
ntication is adopted.

fast-reroute

Use this command to enable IS-IS fast reroute function. Disable
the function with no form of this command.
Router configuration
fast-reroute {enable}[alternate-type]{down-stream-path}