Summary-Address - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (IP Routing Volume I)
Instructions
Example
Purpose
Command Modes
Syntax
94 Confidential and Proprietary Information of ZTE CORPORATION
This command is supported after the platform version 4.6.02.
� When there is no OSPF virtual link, the following information
will be displayed.
ZXR10#show ip ospf virtual-links
� When there are OSPF virtual links, the following information
will be displayed.
ZXR10#show ip ospf virtual-links
Virtual Link to router 180.1.1.1
Transit area 0.0.0.1
via interface fei_1/1 200.1.1.2
State DOWN, Transmit Delay (sec) 1, Cost 5
Timer intervals (sec) : Hello 10, Dead 40, Retransmit 5
The displayed information is described below.
Field
Virtual Link to router
Transit area
Via interface fei_1/1
State
Transmit Delay (sec)
Cost
Timer intervals (sec)
Hello
Dead
Retransmit

summary-address

Use this command to establish the summary address, and sum-
marize other routing protocol paths that are being redistributed to
OSPF. Cancel the setting with the no form of this command.
Router configuration
summary-address summary-address <ip-address><net-mask>
no summary-address <ip-address><net-mask>
Description
Neighbor of the virtual link
Transmit area of the virtual link
Type, serial number and IP address of the
interface that forms the virtual link
Current status of the virtual link
Delay of sending a packet of link status
update on the virtual link
Cost of the virtual link
Time interval of the various timer of the
virtual link
Time interval of the virtual link's sending
HELLO packets
Dead time of the neighbor on the virtual
link
Time interval of the virtual link's
retransmitting LSA