Disable - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (IP Routing Volume I)
Command Modes
Syntax
Syntax
Description
Instructions
Purpose
Command Modes
Syntax
Instructions
Example
100 Confidential and Proprietary Information of ZTE CORPORATION
Router configuration
default-information originate [always][metric <metric-value
>][metric-type <type>][level-1 | level-1-2 | level-2]
no default-information originate
always
metric <metric-val
ue>
metric-type <type>
level-1
level-1-2
level-2
� When this command is not configured, the system will not ad-
vertise the default route in the redistribution route entries.
� If it is the metric-style narrow mode, the range of <metric-va
lue> is 0~63. If it is the metric-style wide mode, the range of
<metric-value> is 0~426142864.

disable

Use this command to disable the running of IS-IS instances and
clear IS-IS running data. Use the enable command to restart
IS-IS instances.
Router configuration

disable

When IS-IS instances are running, the use of this command can
disable the running of IS-IS instances and clear current running
data. The use of the enable command can restart IS-IS instances.
This example disables the running of IS-IS instances and clears
running data.
ZXR10(config)#router isis
ZXR10(config-router)#disable
No matter whether there is a default route in
the redistribution route entries, the system
will always generates a entry of default route
advertisement. If this parameter is not
configured, there will be an advertisement of
default routes only when redistribution routes
has default routes.
Metric value, range: 0~4261412864
Metric type, external or internal, default:
internal
Area Level-1 the router lies in
Area Level-1-2 the router lies in
Area Level-2the router lies in