Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
show ip mroute
show ip pimsm neighbor
Use this command to show the neighbor of the PIM-SM interface.
All modes
show ip pimsm neighbor [<interface-name>]
<interface-name>
1. To show the neighbors of the specified PIM-SM interface, use
the <interface-name> option after this command.
2. Description of the displayed fields of the PIM-SM neighbor is
as follows:
Field
Neighbor Address
Interface
DR Prio
Uptime
Expires
show ip pimsm interface
show ip pimsm packet-count
Use this command to display statistics information of packets re-
ceived/sent by multicast PIM-SM and the statistics of upward sent
packets received.
All modes
show ip pimsm packet-count [<interface-number>]
<interface-number>
Description of the displayed information is as follows:
Confidential and Proprietary Information of ZTE CORPORATION
Interface name
Description
Neighbor IP address
Interface name
Neighbor DR priority
Neighbor lifetime
Neighbor expire time
Interface ID, in the form of board
name/interface number
If a subinterface exists, it can be board
name/interface number/subinterface number
Chapter 3 PIM-SM Protocol
35