Ip Ospf Message-Digest-Key; Ip Ospf Mtu-Ignore - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (IP Routing Volume I)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Purpose
Command Modes
58 Confidential and Proprietary Information of ZTE CORPORATION
ZXR10(config-if)#ip ospf hello-interval 20
ip ospf dead-interval <seconds>

ip ospf message-digest-key

Use this command to configure password serial number pair for the
interface using message digest authentication. Delete the config-
ured OSPF password with the no form of this command.
Interface configuration
ip ospf message-digest-key <keyid> md5 <password>[delay
<time>] encypt
no ip ospf message-digest-key <keyid>
<keyid>
md5 <password>
delay <time>
encypt
No password is specified.
� This command is supported after the platform version 4.6.03.
�
If there are optional parameters, the password serial number
pair will not be used temporarily during the period of <time> to
send protocol packets. But protocol packets can be received.
� The valid characters for the parameter <password> are as fol-
lows:
0123456789abcdefghijklmnopqrstuvwxyz_ABCDEFGHI-
JKLMNOPQRSTUVWXYZ`*-=~!@#$%^&()_+[]{}|;':,./<>\\
This example sets the password serial number pair as 2 and the
password as zxr10 on the interface using message digest authen-
tication.
ZXR10(config)#interface fei_5/1
ZXR10(config-if)#ip ospf message-digest-key 2 md5 zxr10

ip ospf mtu-ignore

Use this command to ignore the check of MTU on the interface
when DD packets are exchanged. Restore default with the no
form of this command.
Interface configuration
Password serial number, integer, range:
1~255
Authentication password, 1~16 characters
(not including Space)
Delay, unit: minute, range: 0~100000
Encrypt the set password