Show Isis Database - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (IP Routing Volume I)
Purpose
Command Modes
Syntax
Syntax
Description
124 Confidential and Proprietary Information of ZTE CORPORATION
Circuit Type:Level-1-2
Level-1 Metric:10 Level-2 Metric:10 Circuit ID:
0000.400a.0a05.02-02
active Adj state:level-1-2
Next hello in seconds:5
The description of the displayed fields is shown below.
Field
Interface
Status
Level
Circ
Level1 DR
Level2 DR
L1/L2 priority
Encapsulsation
Circuit Type

show isis database

Use this command to display information about current database
of IS-IS.
All modes
show isis database [level-1 | level-2][detail][vrf <vrf-nam
e>]
detail
level-1
level-2
vrf <vrf-name>
Description
Interface name
If the interface configured with IS-IS is
started, the status will be "Up" other than
"Down"
Level of the interface, it can be one of
"L1", "L2", and"L1L2"
ID of the interface
Router specified by Level 1 of the
interface, it can be one of these formats:
"xxxx.xxxx.xxxx.xx", "No found",
"Disabled", "Dis is me", and "Point to
point"
Router specified by Level 1 of the
interface, it can be one of these
formats:"xxxx.xxxx.xxxx.xx" "No found"
"Disabled", "Dis is me" and "Point to
point"
Priority of the L1/L2 specified by the
inerface
Type of the encapsulation of packets
Type of the interface, it can be one
of these kinds: Level-1, Level-2 and
Level-1-2
Shows detailed information
The router is in area level-1
The router is in area level-2
VRF name, 1~16 characters