Show Isis Hostname; Show Isis Mesh-Groups; Show Isis Nsf - Zte ZXR10 8900 Series Command Reference Manual

Purpose
Command Modes
Syntax
Syntax
Description
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Purpose
Command Modes
Syntax

show isis hostname

To display the router-name-to-system-ID mapping table entries
for an Intermediate System-to-Intermediate System (IS-IS)
router, use the show isis hostname command.
All modes
show isis hostname [vrf <vrf-name>]
vrf <vrf-name>
This example entering the show isis hostname command dis-
plays the dynamic host mapping table.
R1(config-router)#show isis hostname
Level System id
L1 0001.0000.0001
L2 0001.0000.0001

show isis mesh-groups

Use this command to display IS-IS mesh group information.
All modes
show isis mesh-groups {blocked | group}[vrf <vrf-name>]
blocked
group
vrf <vrf-name>
This command is supported after the platform version 4.8.02.
This example shows how to display IS-IS mesh group information.
ZXR10(config-if)#show isis mesh-groups
IS-IS mesh group 2
fei_1/1
ZXR10(config-if)#show isis mesh-groups blocked
IS-IS mesh group [blocked]:fei_1/1

show isis nsf

Use this command to display parameters of status related with
current graceful restart of IS-IS.
All modes
show isis nsf vrf <vrf-name>
Confidential and Proprietary Information of ZTE CORPORATION
VRF name, 1~16 length
Hostname Dynamic
R1
R1
LSP information is blocked on this interface
Mesh group which the interface belongs to
VRF name, 1~16 characters
group
Chapter 4 IS-IS Protocol
127