Show Ip Ospf Border-Lfas - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (IP Routing Volume I)
Purpose
Command Modes
74 Confidential and Proprietary Information of ZTE CORPORATION
Field
Hold time between
consecutive SPF
Non-stop Forwarding
last NSF restart ago
Area
Enable/disable
It is a stub area
It is a stub area, no
summary LSA
Metric for default route
Area has no authentication
area has simple password
authentication
Times spf has been run
Number of interfaces
Up
Number of ASBR local to
this area
Number of ABR local to
this area
Total number of intra/inter
entries in LSDB
Checksum Sum
Area ranges count
100.1.1.0 255.255.255.0

show ip ospf border-lfas

Use this command to show routes of the backup router of the pri-
mary router.
All modes
Description
Time interval of SPF dispatch
Whether with the ability of nsf or not
Time from last nsf to now
OSPF area identifier
Area status (enabled or disabled)
(Effective in the stub area) ABR can send
the summary route information to the
stub area
(Effective in the stub area) ABR cannot
send summary route information to the
stub area
(Effective in the stub area) Cost of the
default route advertised to the stub area
No authentication in the area
Simple password authentication is used
in the area
Running times of the SPF algorithm
Number of the OSPF interfaces in the area
Number of OSPF interfaces of the area
in the Up status
Number of ASBRs in the area
Number of ABRs in the area
Number of LSAs in and between areas
Sum of the checksums of LSAs between
and in areas
Number of ranges of configured summary
address in the area
IP addresses and masks of each summary
address range are listed in order