Isis Max-Burst; Isis Mtu - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (IP Routing Volume I)
Example
Purpose
Command Modes
Syntax
Syntax
Description
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
110 Confidential and Proprietary Information of ZTE CORPORATION
This example sets the IPv6 metric value of interface fei_1/1 as 66.
ZXR10(config)#interface fei_1/1
ZXR10(config-intf)#isis ipv6 metric 66
ZXR10(config-intf)#isis ipv6 metric 66 level-1
ZXR10(config-intf)#isis ipv6 metric 66 level-2

isis max-burst

Use this command to specify the largest amount of LSP packets
that can be sent once at most. Restore default with the no form
of this command.
Interface configuration
isis max-burst <number>
no isis max-burst
<number>
This example sets the largest amount of LSP packets that can be
sent once at most as 50.
ZXR10(config)#interface fei_1/1
ZXR10(config-intf)#isis max-burst 50

isis mtu

Use this command to set the maximum length of hello packets of
the IS-IS interface. Delete the configuration with no form of this
command.
Interface configuration
isis mtu <512~4096>
no isis mtu
<512~4096>
This command is supported after the platform version 4.8.21.
This example configures the maximum length of hello packets of
the IS-IS interface as 1500 bytes.
ZXR10(config-if)#isis mtu 1500
Largest amount of LSP packets that can be
sent once at most, range: 1~65535, default:
20
Maximum length of hello packets of the IS-IS
interface, in bytes