Max-Lsp-Lifetime; Maximum-Paths; Metric-Style - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (IP Routing Volume I)
Purpose
Command Modes
Syntax
Syntax
Description
Example
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Example
Purpose
Command Modes
Syntax
116 Confidential and Proprietary Information of ZTE CORPORATION

max-lsp-lifetime

Use this command to set the maximum time that link-state packets
persist without being refreshed. Restore the default time with the
no form of this command.
Router configuration
lsp-refresh-time <time>
no lsp-refresh-time
<time>
This example sets lsp-refresh-time as 300 seconds.
ZXR10(config)#router isis
ZXR10(config-router)#lsp-refresh-time 300

maximum-paths

Use this command to configure the maximum equivalence route
entries IS-IS supports.
Router configuration
maximum-paths <number>
no maximum-paths
<number>
If the command maximum-paths is not configured, the maxi-
mum equivalence route entry IS-IS supports will be 1 by default.
This example sets the maximum equivalence route entries IS-IS
supports as 2.
ZXR10(config)#router isis
ZXR10(config-router)#maximum-paths 2

metric-style

Use this command to set IS-IS metric style. Restore the default
value with the no form of this command.
Router configuration
metric-style {narrow | wide}
no metric-style
Maximum time that link-state packets persist
without being refreshed, in seconds, range:
1~65535, default: 900 seconds
Maximum equivalence route entries IS-IS
supports, range: 1~8