Command Mode Function - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
T 2 COMMAND MODES
ABLE
Mode
User mode
Privileged mode
Global configura-
tion mode
Port configuration
mode
VLAN database
configuration mode
VLAN configuration
mode
VLAN interface
configuration mode
MSTP configuration
mode
Standard ACL
configuration mode
Extended ACL
configuration mode
L2 ACL
configuration mode
Hybrid ACL
configuration mode
RIP configuration
mode
RIP address
configuration mode
OSPF configuration
mode
12 Confidential and Proprietary Information of ZTE CORPORATION

Command Mode Function

ZXR10 5900/5200 allocates the commands to various modes
based on the function. In order to authorize the facilitation to
user's configuration and management for the switch only one
command can be executed in the special mode.
Input a "?" mark in any command mode to view allowed commands
in this mode. The main commands of the ZXR10 5900/5200 are
shown in Table 2.
Prompt
ZXR10>
ZXR10#
ZXR10(config)#
ZXR10(config-gei_1/x)#
ZXR10(vlan)#
ZXR10(config-vlan)#
ZXR10(config-if)#
ZXR10(config-mstp)#
ZXR10(config-std-acl)#
ZXR10(config-ext-acl)#
ZXR10(config-link-acl)#
ZXR10(config-hybd-acl)#
ZXR10(config-router)#
ZXR10(config-router-af)#
ZXR10(config-router)#
Entry Command
Directly enter it after logging in to the
system
enable (user mode )
configure terminal (privileged mode)
interface {<interface-name>|byname
<by-name>} (global configuration mode)
vlan databaseprivileged mode
vlan {<vlan-id>|<vlan-name>} global
configuration mode
interface {vlan <vlan-id>|<vlan-if>}
global configuration mode
spanning-tree mst configurationglobal
configuration mode
acl standard {number <acl-number>|
name <acl-name>} global configuration
mode
acl extended {number <acl-number>|
name <acl-name>} global configuration
mode
acl link {number <acl-number>| name
<acl-name>}global configuration mode
acl hybrid {number <acl-number>|
name <acl-name>} global configuration
mode
router ripglobal configuration mode
address-family ipv6 vrf <vrf-name>RIP
routing configuration mode
router ospf < process-id> global
configuration mode