Table 3-3 Editing Commands Through Keystrokes - Zte ZXR10 5250 Series Configuration Manual

Gigabit-port intelligent switch
Hide thumbs Also See for ZXR10 5250 Series:
Table of Contents

Advertisement

ZXR10 5250 Series Configuration Guide
Command History
The user interface supports the function of recording entered commands. A maximum of
20 historical commands can be recorded. The function is very useful for recalling a long
or complicated command.
To recall commands from the history buffer, perform one of the following actions.
Keystroke
Ctr+P or the up arrow key
Ctr+N or the down arrow key
Editing Commands Through Keystrokes
For the keystrokes that you need to edit command lines, refer to

Table 3-3 Editing Commands Through Keystrokes

Keystroke
Ctr+P or the up arrow key
Ctr+N or the down arrow key
Ctr+B or the left arrow key
Ctr+F or the right arrow key
Tab
Ctr+A
Ctr+E
Ctr+K
Backspace or Ctr+H
Ctr+C
Ctr+L
Ctr+Y
SJ-20131111172707-002|2013-11-27 (R1.0)
Function
Recall commands in the history buffer, beginning with the most
recent command. Repeat the key sequence to recall successive
older commands.
Return to more recent commands in the history buffer after
recalling commands with Ctr+P or the up arrow key. Repeat the
key sequence to recall successively more recent commands.
Purpose
Recall commands in the history buffer, beginning with the
most recent command. Repeat the key sequence to recall
successive older commands.
Return to more recent commands in the history buffer
after recalling commands with Ctr+P or the up arrow key.
Repeat the key sequence to recall successively more recent
commands.
Move the cursor back one character.
Move the cursor forward one character.
After entering a character or string, if there is only one
command starting with the character or string, pressing this
key will show the complete command.
Move the cursor to the beginning of the command line.
Move the cursor to the end of the command line.
Delete all characters from the cursor to the end of the
command line.
Delete the character on the left of the cursor.
Cancel the command and display the prompt.
Redisplay the current command line.
Recall the most recent entry in the buffer.
3-14
Table
3-3.
ZTE Proprietary and Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents