Syslog Configuration; Syslog Overview; Configuring Syslog - Zte ZXR10 5900 Series User Manual

Command
logging on
ZXR10(config)#
Command
logging buffer <buffer-size>
ZXR10(config)#
Falling threshold is 10, assigned to event 0
On startup enable rising or falling alarm
ZXR10#
4. This example shows how to configure and enable the event
function.
ZXR10(config)#rmon event 1 log trap rmontrap
description test owner rmontest
ZXR10(config)#
Configure an alarm control entry and wait for 10s, and then
view RMON event contents with the show command.
ZXR10#show rmon event
Event 1 is active, owned by rmontest
Description is test
Event firing causes log and trap to community rmontrap,
last fired 05:40:20
Current log entries:
index
1
ZXR10#

SysLog Configuration

SysLog Overview

ZXR10 5900/5200 provides users with log information setting
and query functions. Log information provides convenient routine
maintenance of the routing switch. User can view alarm infor-
mation and port state change condition on the routing switch
through log information. Log information can be displayed on the
configuration terminal in real time or can be saved to a file on
the routing switch or background log server. The syslog protocol
can be enabled on ZXR10 5900/5200 so that the routers can
communicate with the background syslog server to deliver the log
information.

Configuring SysLog

1. To enable the log function, use the following command.
2. To set the log buffer size, use the following command.
3. To set log clearance mode, use the following command.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 11 Network Management Configuration
time description
05:40:14 test
Function
This enables the log function.
Function
This sets the log buffer size.
121