Ordering Thermal Paper; Ordering Other Supplies - NCR 7193 Owner's Manual

7193 Owner's Guide

Ordering Thermal Paper

The 7193 requires qualified thermal thermal paper with the following dimensions:
Diameter
83 mm max. (3.27 in.)
The paper must not be attached at the core. Use paper with a colored stripe at
the end to indicate that the paper is running low.
To order thermal receipt paper, contact your sales representative or order from NCR at the
following address or toll free number:

Ordering Other Supplies

Contact your sales representative to order the supplies listed in the table.
Item
Power supply with attached cable to
printer and U.S. power supply cord
Power supply, attached cable
Power supply cord (to outlet)
Communication cables
Printer wall-mount kit
Cash Drawers
83 meters (273 ft.)
NCR
Media Products Division
9995 Washington Church Road
Miamisburg, OH 45342
Voice: 1(800)543-8130 (toll free), or local listing of Media Products sales office
RS-232C 25-pin (host) to 9-pin
RS-232C 9-pin to 9-pin
Parallel 25-pin to 25-pin
Length Width
80 mm ± .2 mm (3.15 ± .02 in.)
Type
United States
International (no plug)
United Kingdom
S.E.V.
Australia
International (with plug)
(3 meters—9.8 ft.)
(3 meters—9.8 ft.)
(3 meters—9.8 ft.)
August 1998
Chapter 1: About the 7193 Printer
Number
7193-K330
7193-K301
7193-K320
7193-K321
7193-K322
7193-K323
7193-K324
7193-K326
1420-C001-0030
1416-C057-0030
1420-C003-0030
7193-K260
7052-K657
3