Knife Option - NCR 7167 Owner's Manual

7167 Owner's Manual
** SET MAX POWER OPTION ?
YES
NO
55W Power Supply*
75W Power Supply
Note: Press the Paper Feed Button for at least one second to validate the selection.
Paper Low Sensor
Paper Low Sensor makes it possible to enable or disable the paper low sensor for
particular printer configurations.
Press the Paper Feed Button for the option you want.
** SET PAPER LOW SENSOR OPTION ?
YES
NO
Enable Paper Low Sensor*
Disable Paper Low Sensor
Note: Press the Paper Feed Button for at least one second to validate the selection.
Paper Width
This function allows the user to set the default paper width for the receipt thermal printer
to 58mm or 80mm wide.
Press the Paper Feed Button for the paper width option you want.
** SET PAPER WIDTH ?
YES
NO
Paper Width = 80 mm*
Paper Width = 58 mm
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection.

Knife Option

This option makes it possible to set the Knife Option if it is installed in the printer. This
setting should only be changed is the option is added or removed.
-> Long Click
-> Short Click
-> Long Click
-> Short Click
-> Long Click
-> Short Click
-> Long Click
-> Short Click
-> 1 Click
-> 2 Clicks
-> Long Click
-> Short Clicks
November 2002
Chapter 4: Diagnostics
68